niimbot-trade-workshop
Niimbot › Trade & Workshop
Trade and workshop label printers, built for the job site
If you're still hand-writing wire markers with a Sharpie, paying $4 a sleeve for pre-printed Brady labels, or trying to find the right drawer in a shop full of unlabelled parts bins — the Niimbot C1 and M2 will pay for themselves in a week. Print straight from your phone or import a job sheet from Excel.
The problem we're solving
Panel builders, sparkies, machine shops, and parts departments waste hours every week on identification. Hand-written sleeves and dymo tape look unprofessional, fade, and turn into a fault-finding nightmare. Commercial wire-marker printers cost $1,500–$4,000 and need a desktop, software, and training. The Niimbot C1 and M2 put 300dpi thermal-transfer printers in your toolbox or on the workshop bench for around the cost of a decent power tool.
Two printers, two jobs
Niimbot C1
Heat-shrink tube & PVC sleeve printer
- Prints on heat-shrink tubing (ø1–6mm) and PVC marker sleeves (0.5–25mm²)
- Auto-clamping and auto half/full cut — sleeves come out ready to apply
- 300dpi thermal transfer — sharp at small text sizes
- Bluetooth to phone, USB to PC, batch print from Excel
- Rechargeable battery, ~2kg, takes site abuse
For: Electricians, panel builders, switchboard shops, marine and industrial electrical, machine builders, communications/comms cabinet installers.
Niimbot M2
Industrial thermal transfer label printer
- 20–50mm wide labels, full thermal transfer (ribbon)
- Resists water, oil, alcohol, chemicals, abrasion, temperature extremes
- 300dpi — clean barcodes and QR codes
- Smart consumable recognition — auto-detects the loaded label
- Bulk import from spreadsheet via PC app, map columns to fields
For: Asset tagging, machinery ID, terminal block labels, parts bins, drawer and shelf labels, tool ID, valve and pipe ID, switchboard front panels.
Who's buying these
Electricians & Panel Builders
Wire numbering, terminal blocks, switchboard front-panel ID, comms cabinet labels. C1 for sleeves, M2 for stickers.
Machine Shops & Engineering
Tool ID, machine asset tags, calibration stickers, drawer and parts-bin labels. The M2 handles oily, abrasive environments.
Parts & Stores Departments
Bin and shelf labels with barcodes, QR codes linking to stock records, inventory location tags. Print from Excel in batches.
Mechanics & Auto Workshops
Tool drawer labels, parts storage, fluid container ID, shadow board outlines. Survives degreaser and brake clean.
Marine & Solar Installers
UV-resistant cable and panel ID. C1 heat-shrink sleeves stay legible after years in the sun.
Facilities & Maintenance
Valve and pipe ID, HVAC duct labels, asset registers, test-and-tag stickers, breaker ID.
Typical applications
- Wire numbering in switchboards
- Cable bundle ID in machine builds
- PLC terminal block labels
- Sensor and actuator tags
- Valve, pipe, and instrument ID
- Asset and inventory tagging
- Test & tag stickers
- Marine and solar installation ID
- HVAC duct and damper labels
- Server rack and patch panel ID
- Parts bin and shelf labels
- Tool drawer and shadow board ID
- Calibration and inspection stickers
- Hose, fluid, and lubrication ID
Consumables we keep in stock
- C1 heat-shrink tube label rolls (multiple sizes)
- C1 PVC wire marker sleeves (0.5–25mm²)
- C1 ribbon cartridges
- M2 thermal transfer labels (multiple widths, white and coloured)
- M2 ribbon cartridges
Outfitting a team or a workshop?
Trade pricing on volume. Demo unit available — we'll bring it to your site.
Email parts@southerntech.co.nz or call SouthernTech, Christchurch.